Self Faced Yorkstone Thin Paving

Bridge Street Stone

£66.00
  • Self Faced Yorkstone Thin Paving
  • Self Faced Yorkstone Thin Paving
  • Self Faced Yorkstone Thin Paving
  • Self Faced Yorkstone Thin Paving
  • Self Faced Yorkstone Thin Paving
  • Self Faced Yorkstone Thin Paving
  • Self Faced Yorkstone Thin Paving

Self Faced Yorkstone Thin Paving

Bridge Street Stone

£66.00

£66 Inc VAT

£66.00

  • Description
  • Laying
  • Delivery

Yorkshire Stone Self Faced Paving Flags.

Hand Made by our time served stone dressers from local quarries.

Please enter M² required into the quantity box

This paving is extracted from local sedimentary stone quarries, which are situated in the quarrying belt of the Pennines of West Yorkshire. The thickness of the material when split from the block is generally 15 – 30mm. The paving slabs are then produced from these scants in both Random sizes and 600mm widths and random lengths. (other set sizes available on request). Predominantly Grey with naturally occurring buff veining the stone exhibits a mica fleck on the stone surface. It is ideally suited to connect both internal and external areas. Thinner graded slabs are better suited for internal use and outdoor patio and pathway applications. (please note – we would advocate the thicker grade for driveways or vehicle over-run areas). Generally, our self-faced flags are made in the traditional way but finished with sawn edges and are supplied with a self-faced smooth finish.

For split crates or collected prices please contact us here or call on 01282 860571

Origin:

UK

Sizes:

Fixed Widths of 600mm x Random Lengths
or
Random Lengths x Random Widths

Edge Profile:

 Sawn Sided Finish 

Surface Finish:

 Self-Faced (Naturally Split along the sedimentary bed of the stone)

Suitable for:

 Patios, Terraces, Paths, other non-vehicular areas

Cutting Tolerance:

 15mm-30mm

Sold in exact quantities required:

 Sold by M² packs

 Availability:

 Usually 100 M² in stock but please contact us to check current lead times for larger quantities
Here at Bridge Street Stone we recommend that all Flagstones purchased from us are laid on a full bed of mortar, bedding each slab individually to account for variation in thickness. This method is most commonly used when laying Natural Stone due to the thickness variation, which relies on each flag having a bed prepared for it individually. Once the bed is prepared, the flag is laid and then the next bed prepared and so on. To determine the correct way up, you will notice that each given flag edge tapers inwards. It is the larger surface area to be seen therefore the smaller surface area (tapered in) is the underneath. To finish, we recommend using ‘JOINT IT’ . This particular product is used for jointing paving slabs, cobbles & Natural Stone by simply brushing in. Once your Paving/Driveway area is complete to finish off we also recommend sealing the area with Hg Impregnator which is a Basic treatment for natural stone against penetration of dirt and grease stains.

We can provide very competitive delivery prices to most destinations within mainland UK.

Some combinations of product and destination cannot be calculated online. If you cannot find the delivery charge to your area, please call our sales team on 01282 860 571 or email salesoffice@stonepaving.co.uk for a delivery quote.

Please refer to our Delivery Terms at the bottom of our home page.

postcode delivery table